Low Profile Pool Buildings

Swimming Pool Buildings:

Pool Buildings

Retractable Enclosures

Low Profile Enclosures

Air Domes

Commercial Applications

Site Map

Low Profile Pool Buildings

If you want a pool building cover that is not too imposing the Estival enclosure is the ideal choice for you as it low profile and designed with safety in mind and will suit most budgets. We can also supply the Algarve as a low profile option as well. The main structure, powder coated aluminium, and the glass is all the same quality as the larger enclosures. Clear toughened safety glass is used on all side walls with triple ply 8 or 10ml polycarbonate on the roof.

The height of the overall enclosure depends on the size of your pool but they can be as low as 0.5m up to 1.4m, basically the lower the enclosure the smaller the pool must be because of the number of sections required to cover the pool. They can be up to 21m in width with each section being 2.1m wide so the pool size will again determine how many sections are required.

Two sets of keys are provided with each enclosure along with a comprehensive Owners Manual.  You can swim inside the low enclosure by sliding the enclosure open from where any section joins, opening a door and swimming inside or by pushing the enclosure right back off the pool – leaving an archway at the end as you do with the full height enclosures.

New Low Enclosure Design

The new "IRIS" enclosure is also very easy to operate with a unique guiding mechanism built into the apex of the roof allowing the enclosure to be opened/closed easily by just one person. There are no ground rails so nothing to trip on and the enclosures can be fully retracted or opened at any central point plus the rotating end panel can be fixed to the small enclosure to overhang one end of the pool when open which will not obstruct the pool area. It is also possible to have a door fitted in the side of the enclosure which opens half the roof space of that section - easy access for undercover swimming!